Embedded Files
Wireless CAN Bus Analyser
Our Wireless CAN Bus Analyser provides a simple, user-friendly, and cost-effective solution for accessing data messages on any CAN Bus interface via WiFi. The device features a configurable internal CAN Bus termination resistor of 120 Ohms and can be configured to work as either a WiFi Station and connect to your WiFi network or as a WiFi Access Point to directly connect your PC to the device.
The software that is compatible with the device includes features such as decoding CAN Bus messages, logging CAN Bus messages to the PC, and transmitting CAN Bus messages.
Applications
Passenger cars.
Building automation.
Truck and buses.
Industrial machine control.
Lifts and escalators.
Trains.
Maritime electronics systems.
Aircraft and aerospace electronics.
Energy storage systems.
Specifications
General specifications
Small form factor: 63.5 x 43.5 x 30 mm (2.5 x 1.71 x 1.18 in).
Extruded aluminium 6063 T6 (HE9) enclosure.
CAN Bus Connector: 4 pin pluggable terminal block.
2 LEDs for indicating faults and activity:
WiFi activity.
CAN Bus activity.
Configuration Mode via a push button.
Device Firmware Update.
CAN Bus
Supports Standard CAN 2.0A (11 bits ID) and Extended CAN 2.0B (29 bit ID).
Configurable CAN Bus speed (25, 50, 100, 125, 250, 500, 800, 1000 kbps).
Configurable filter for logging the desirable CAN Bus messages based on the message ID.
Configurable 120 Ohms termination resistor.
Configurable listen only mode or device mode.
High Electrostatic Discharge (ESD) handling capability on the Bus pins.
ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 fully compliant CAN Bus transceiver.
AEC-Q100 qualified CAN Bus transceiver.
WiFi
Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
Up to 20.5 dBm of transmitting power.
WiFi Protection: WPA/WPA2-Enterprise and WPS.
Supports the 2.4GHz WiFi band.
Station and Access Point modes.
Software
Configurable filters based on the message ID.
Decode the received CAN Bus messages based on the CAN Bus ID.
Save the received CAN Bus messages to "CSV" files (comma-separated values).
Save and load the transmitted CAN Bus messages.
Maximum messages to transmit: 20.
Configurable repeating time for the transmitted messages.
Real-Time OBD-II decode:
Service 1 and service 2.
PIDs 0x00 to 0x5F.
Electrical characteristics
Wilde range voltage supply input: from 7V to 28V DC.
Low power consumption: 62mA @ 12V (0.72W).
CAN Bus lines protection: 350 W Peak Power Dissipation per Line (8/20 sec Waveform).
Low Capacitance High−Speed CAN Data Rates.
Downloads
Package includes
Wireless CAN Bus Analyser.
4 Ways pluggable terminal block.
2 Ways 2.54 mm jumper.
SMA WiFi Antenna.
Report abuse