CAN Bus Analyser
Isolated CAN Bus Analyser
The Diagonal Systems CAN Bus Analyser offers a simple, user-friendly, and cost-effective solution for accessing the data messages on any CAN Bus interface via USB. The device features two internally connected connectors and a configurable CAN Bus termination resistor of 120 Ohms. The most notable feature is that the USB interface is electrically isolated at 1 kV from the CAN Bus interface.
The accompanying software includes features such as decoding CAN Bus messages, logging the CAN Bus messages to a PC, and transmitting CAN Bus messages.
Applications
Passenger cars.
Building automation.
Truck and buses.
Industrial machine control.
Lifts and escalators.
Trains.
Maritime electronics systems.
Aircraft and aerospace electronics.
Energy storage systems.
Specifications
General specifications
Full isolation from USB and CAN Bus.
Power and PC communications over USB mini B connector.
Small form factor: 66.22 x 67.22 x 28.5 mm (2.61 x 2.65 x 1.16 in).
High performance 32 bits automotive microcontroller.
3 LEDs for indicating faults and activity:
Device status.
CAN Bus activity.
USB activity.
Pluggable terminal block and DB-09 connectors to be used for the CAN Bus.
CAN Bus
Fully ISO 11898-2:2003 compliant.
Supports Standard CAN 2.0A (11 bits ID) and Extended CAN 2.0B (29 bit ID).
Configurable CAN Bus speed (20, 33.333, 47, 50, 83, 95, 100, 250, 500, 800, 1000 kbps).
Configurable 120 Ohms termination resistor.
Software
Configurable filters based on the message ID.
Decode the received CAN Bus messages based on the CAN Bus ID.
Save the received CAN Bus messages to "CSV" files (comma-separated values).
Save and load the transmitted CAN Bus messages.
Maximum messages to transmit: 20.
Configurable repeating time for the transmitted messages.
Real-Time OBD-II decode:
Service 1 and service 2.
PIDs 0x00 to 0x5F.
Electrical characteristics
Low power consumption: 78mA @ 5V (0.39W).
CAN Bus 50-kV/μs Typical Transient Immunity.
CAN Bus-Fault Protection of –27 V to 40 V.
Isolation Barrier: DCDC 1 kV, CAN Bus 2500 kV.
Downloads
Documents
CAN Bus Analyser Specifications
CAN Bus Analyser Instructions Manual
USB to CAN Bus communications protocol
Software
CAN Bus Analyser 2.13 - Installer
Device Firmware Update
Drivers
CAN Bus Analyser Windows Driver
Source code examples
Package includes
CAN Bus Analyser.
4 Ways pluggable terminal block.
Not included
USB 2.0 A Male to Mini B 5-Pin cable.
DB-09 connector.